Learn
More About holographic label Holographic
label Sample 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 77 76 77 78 79 80 81 82 83 84 88 86 88 88 89 90
Master shooting system
Recombination Machine
Electronic Forming
Laser Hologram Embosser
Laminator
Hot Melt Adhensive Coating Machine
Automatic Die-cutting Machine
Laser Hologram Embosser Narrow Web Hard Laser Hologram Embosser Mold 1
Narrow web hard laser hologram embosser is designed for producing 160MM width laser hologram products, such as Laser Hologram Decals, narrow web laser hologram film, laser hologram aluminum foil,etc.
Specifications:
1. Max embossing dimension : 160*156MM/sheet
2. Embossed film thickness: 0.012MM-0.12MM
3. Max rewind & unwind rolls diameter: 500MM
4. Temperature scope: 0-180¡æ(Adjustable)
5. Embossing speed: 0M-30M/Min(Adjustable)
6. Counter scope: 0-99999 (Adjustable)
7. Shim size: <160*156*0.05 MM
8. Shim lift: 5,000M-10,000M/Shim
9. Voltage std.: 220V 50HZ
10. Power consumption: 3KW
11. Compressed air needed: 0-5Kg/cm2 (Adjustable)
12. Embosser dimension: 1300MM*750MM*120MM
13. Embosser weight: 250KG
Laser Hologram embosser cylinder photo
Narrow Web Hard Laser Hologram Embosser Mold 2
Narrow web hard laser hologram embosser is designed for producing 160MM width laser hologram products, such as Laser Hologram Decals foil in roll which has precise gap between two stickers. Sticker embossed by this embosser can be applied automatic by sticker application machine. Comparing to similar mold embosser made in USA and Germany, our embosser has same quality and much lower price. This laser hologram embosser can emboss slim laser hologram decal of cigarette packaging.
Characteristics:
1.Rectify a deviation and put one automatically, rewind smoothly with little deviation..
2. Intellectual temperature control, it is accurate in temperature control when embossing.
3. Automatic control or manual control to set unwind and rewind parameter,
4. Automatic control or manual control to adjust juction of hologrma nickel shim.
5.The structure is reasonable in design, it is flexible and convenient to dismantle
Specifications:
1. Width of door: 300mm(MAX)
2. Embossing are: 152.4mm(standard)----161.0mm(customized)
3. Power : 220V or 380V, 4KW
4. Air pressure when embossing : 8kg/cm2(0.8mpa)
5.Dimension: 1850MM*900MM*1200MM
6.Weight: 700kg
|